प्रीमियम परफॉरमेंस स्ट्रेन गेज

• High overload capability
• Shock and vibration resistant
• Operation in high temperatures
• 2-wire, 4-20 mA option: Intrinsic safety approval to E Exia IIC T4 (Tamb=60°C) BASEEFA, CENELEC EN50-020

Specification :

Common Specifications :

Pressure Ranges :

• High(psi) ............... 0-75; 100; 150; 200; 250; 350; 500; 750; 1000; 1500; 2200; 3500; 5000; 7500; 10,000
• (bar) .............. 0-5; 7; 10; 15; 25; 35; 50; 70; 100; 150; 200; 250; 350; 500; 700;
• Medium (psi) ............... 0-10; 15; 20; 25; 35
• (bar) .............. 0-0.7; 1.0; 1.5; 1.7; 2.5

Pressure References

• High Pressure Range .... Vented gauge1: 0-75 to 0-350 psi
• Absolute and sealed gauge: 0-75 to 0-10,000 psi
• Medium Pressure Range .. Vented gauge1 and absolute: 0-10; 15; 20; 25; 35 psi (0-0.7; 1.0; 1.5; 1.7; 2.5 bar)
• Pressure Limit ................... ≥5x full range pressure or 12,000 psi (830 bar), whichever is less. Will not cause a zero offset
• exceeding 0.04% FRO (recoverable within a few hours)
• Burst Pressure ................... ≥20 x full range pressure or 22,000 psi (1,520 bar), whichever is less
• Pressure Media ................. Liquids or gases compatible with 17-4 pH and 17-7 pH stainless steel or Inconel 625
• Shunt Calibration ............. 80% ±5% full range pressure (not fitted in P980 Series)
• Combined Nonlinearity, Hysteresis and Nonrepeatability ..... High Range: <±0.10% F.R.O. (BSL); Medium Range: <±0.20% F.R.O. (BSL)

Temperature Range :

• Operable ........................ -65°F to 250°F (-54°C to 120°C)
• Compensated ................. 32°F to 212°F (0°C to 100°C)
• Storage ............................... -65°F to 300°F (-54°C to 150°C)

Humidity :

• Connector Version ........ 95% Relative humidity
• Cable Version ................ Immersible to IP67 (fluid must no enter the ends of the cable)
• Acceleration Response ..... Above 500 psi (35 bar) ±0.02% F.R.O./g; below 500 psi (35 bar) ±0.10% F.R.O./g
• Vibration ............................ Surpasses MIL STD810C Method 514-2 Curve L and EUROCAE ED 14A/RTCA 160A
• Shock ................................. 1000 g for 5 msec will not damage the sensor
• EMC ................................... The P940, P950, P960 and P980 and P990 Series are CE marked, and when correctly installed comply with the EMC Directive 89/336/EEC Generic Standards for Residential Commercial, Light Industrial and Industrial environments. Note: The P980 Series when used in Intrinsic Safety applications does not comply with the Industrial environment directive.
• Insulation Resistance ....... 500 Mohm at 50 VDC at 25°C