Home | » Products | » Humidity & Temperature Sensors | » Low Cost Transmitters - Transducers | » The Most Versatile Hygroclip2 Probe Yet |
The Most Versatile Hygroclip2 Probe Yet

Our firm is successfully associated in the industry as one of the praiseworthy exporters and importers of The Most Versatile Hygroclip2 Probe Yet. This is extensively utilized for measures relative temperature and humidity. The given versatile hygroclip2 is available in an array of technical specifications as per the application requirements of patrons. In addition to this, our vendor’s quality analysts stringently check this level switch on several quality standards to ensure its accurate performance. We ensure our patrons that the provided the most versatile hygroclip2 probe yet is best from the other competitors array.
Details :
- Power supply range: 5…16 VAC / 5…24 VDC
- Outputs: 0…1 V / 0…5 V / 0…10 V (standard probes)0…1 V / 0…5 V / 0…10 V / 0…20 mA / 4…20 mA (industrial probes)
- Excellent long-term stability <1 %RH / year
- Voltage outputs configurable via software
Specification :
General specifications | Standard probe | Industrial probe |
Device type | Humidity / Temperature probe | |
Range of application measurement probe | -40…85 oC / 0…100 %RH | -100…200oC * / 0…100 %RH |
Accuracy at 23oC, + 5 K | 0.8 %RH / 0.2 K @ 5…24 VDC | |
Outputs | Analog (voltage / current), digital (UART / RS-485) | |
Power supply | 5…16 VAC / 5…24 VDC (0...1 V) | |
IP protection | IP65 | |
Technical information | ||
Current consumption | 7 mA (typical) @ 24 VDC, 0…10 V | |
Range of application electronics | -40…85oC / 0…100 %RH | |
Functions | ||
Psychrometric calculations | Dew point / Frost point | |
Adjustment via software | Single point, multipoint, dew point (%RH / °C), with service cable | |
Probe | ||
Filter | Polyethylene, 20 µm | No filter ex works |
Filter carrier | Polycarbonate | Brass, nickel-plated |
Maximum wind velocity | 20 m/s, with polyethylene filter | 3 m/s, without filter |
Length of extension cable | 2m/5m | |
Maintenance / Calibration | Annual calibration (recommended) | |
Humidity sensor | ROTRONIC HYGROMER® IN-1 | |
Temperature sensor | Pt100 1/3 Class B | |
Analog output | 0…1 / 5 / 10 V | 0…1 / 5 / 10 V |
Digital output | UART or RS-485 |
|
Analog output | Accuracy at 23oC, < 1 mV (1 V) / <10 mV (10 V) / <20 µA | |
Response time τ63 | <15 s | |
Long-term stability, humidity sensor | <1 %RH / year | |
Conformities / Housing | ||
CE / EMC compatibility | CE conformant 2007/108/EG | |
FDA / GAMP conformity | 21 CFR Part 11 / GAMP 5 | |
Housing material | Polycarbonate | PEEK |
Dimensions probe head | ||
Diameter | ∅ 15 mm | |
Length | 135 mm | 100 mm / 250 mm |
Sensor cable | - | 2 m / 5 m |
![]() |
JUPITER INTEGR SYSTEMRATED SENSOS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |