Design Flex Switches

Next > >

Get a Price/Quote

Send Inquiry

Product Code : 07

Price And Quantity

Minimum Order Quantity
1 Piece
Price Range
6000.00 - 35000.00 INR

Product Specifications

Accuracy
+20 %
Pressure
8-15 PSI

Weight
10-30 Grams (g)
Material
Gold Inlay

Power
AC/DC Volt (v)
Voltage
120/30 Volt (v)

Product Description

We take pleasure to introduce ourselves as one of the leading importers and exporters a quality array of Design Flex Switches that are suitable for use in a variety of ranging from sip-and-puff communication systems, applications for the handicapped to arc fault detection aboard the Trident submarine. Precisely developed in accordance with the industrial norms employing innovative techniques, these switches are accessible in varied specifications. Before the end delivery, these design flex switches are thoroughly checked by the quality inspectors on varied norms to ensure their flawlessness.

PSF100A pressure switches utilize a patented double diaphragm/contact configuration to protect against false actuation due to shock and vibration.

Features

Shock and vibration resistance
Lightweight, miniature size
Extremely fast response time
Military approved

SPECIFICATIONS :

MECHANICAL
Standard Tolerance	+20%
Tolerance	(Tighter tolerances available)
Switch Type	SPST normally open \| double-make/double-break
Switching Medium	Air; compatible fluids on "High" side
Mechanical Life	More than 20 million cycles
Proof Pressure	8 psi: for units where set point is 3.0" H2O or less 15 psi: for units where set point is greater than 3.0" H2O 8 psi: for units with Ptfe diaphragm
Weight	Less than 10 garms
Shock & Vibration	At zero pressure, will not make at 50G's shock, will not make at 10G's, 50 to 2000 Hz vibration
Operating Temp.	+40^oF to +150^oF (standard) \| -46^oF to +205^oF (Consult Factory)
PHYSICAL
Mounting	Eyeletted No. 2 screws
Case Material	Polycarbonate (other materials available)
Contact Material	Gold Inlay
Porting Options	Two .200" diameter barbed ports (low / high) for use with 1/8" - 3/16" ID tubing
Diaphragm Material	Polyurethane standard (Ptfe optional)
Electrical Connections	Terminals - .187"x.020" tab-type, for use with quick disconnects (ref. AMP 2-520182-2 or equivalent)
Pressure Ports	Two .200" diameter barbed ports for use with 1/8" - 3/16" ID tubing
ELECTRICAL
Current Rating	40mA resistive for life in excess of 20 million cycles
Operating Voltage	AC/DC - 30V or less with resistive load; 120 VAC neon lamp load For higher loads use SRF-100B solid state relay