Precision Gauge Heads

Next > >

<< Previous

Get a Price/Quote

Send Inquiry

Product Code : GCD SE

Price And Quantity

Minimum Order Quantity
1 Piece
Price Range
7000.00 - 30000.00 INR

Product Specifications

Application
For Roller Gap Control and In-process Wet Grinding
Temperature
-13 to 185 Fahrenheit (oF)

Weight
50-200 Grams (g)
Test Range
-25oC to 85oC

Voltage
8.5 to 28 Volt (v)
Product Type
Gauge Heads

Power
DC Volt (v)
Material
SS

Product Description

The GCD-SE is available in five unipolar measurement ranges, with standard strokes from 0 to 0.1 inch to 0 to 2.0 inches. Operating on a single ended 8.5 to 28.0 volt dc. input, and minimal current draw, the GCD-SE is ideally suited to portable measurement applications. Hermetically sealed, the GCD-SE is also well suited to in-process wet grinding and machining applications. Internal regulation provides immunity from output sensitivity to input voltage fluctuation and ripple. Internal EMI, ESD and RFI protection, provide CE compliance when correctly installed. Incorporation of a new oscillator design provides exceptional output stability over a wide range of operating temperatures. Synchronous demodulation insures unsurpassed noise rejection.

Features

CE Compliant
Heavy-duty, All-welded Construction
Unipolar Ranges: 0.1" to 2.0"
8.5 to 28 VDC Operation
Low Power Consumption
May Be Battery Operated
0 to 5 and 1 to 6 VDC Outputs
New Heavy Duty Front End
Hermetically Sealed Design

Options :

Special Contact Tips
Mating Connector
Air Extend Spring Retract

Applications :

Roller Gap Control
In-process Wet Grinding
Hand Held Gages
X-Y Positional Feedback

Technical Specification :

Input Voltage	8.5 to 28 VDC
Input Current	6 mA nominal
Line Regulation	0.2 mV/V (typical)
Operating Temperature	-13^oF to 185^oF
Range	(-25^oC to 85^oC)
Storage Temperature	-65^oF to 250^oF
Range	(-55^oC to 125^oC)
Output Voltage	0 to 5 VDC (4-wire); 1 to 6 VDC (3-wire)
Output Impedance	< 1S
Noise and Ripple	<10 mV Rms
Linearity	0.25% full range
Repeatability	0.000025 in (0.0006 mm)
Stability	0.1% full range
T/C of Scale Factor	0.025%/^oF max (0.05%/^oC max)
Shock Survival	250 g for 11 milliseconds
Vibration Tolerance	10 g up to 2 kHz
Housing Construction	TIG welded 400 series stainless steel
Termination	6-pin MS style hermitic connector