Back to top
Send SMS    Call Me Free
08037304309
Trust Stamp

Intrinsically Safe Humidity and Temperature Transmitters

Intrinsically Safe Humidity and Temperature Transmitters
Intrinsically Safe Humidity and Temperature Transmitters
Send Inquiry
Product Code : ATEX
Price And Quantity
  • Minimum Order Quantity
  • 1 Piece
  • Price Range
  • 15000.00 - 75000.00 INR
Product Specifications
  • Voltage
  • 10-28 Volt (v)
  • Color
  • White and Silver
  • Product Type
  • Humidity and Temperature Transmitters
  • Weight
  • 1030-1140 Grams (g)
  • Type
  • Electronic
  • Exterior Material
  • Aluminium
  • Temperature Range
  • -10-60 Celsius (oC)
Product Description

The new HygroFlex5-EX series is the latest development in two-channel transmitters for exact measurement of humidity and temperature in explosive atmospheres. This measuring device conforms to the latest international standards. The HF5-EX series consists of a robust aluminium transmitter with or without display. The attached probes are cast into a stainless-steel tube, and are certified for operation in Zone 0/20. The transmitter itself is certified for Zone 1/21. The intelligent design of the circuitry with electrical isolation permits the measuring system to be operated without an intrinsically safe power supply.

Reliable Measurements Under Extreme Conditions :

  • Measurement of relative humidity and temperature, optional output of dew point and other calculated parameters
  • Safe operation in areas with explosion risk
  • Intrinsically safe electrical construction
  • No intrinsically safe power supply required
  • Interchangeable stainless-steel probes
  • Robust aluminium housing

Functional display :

  • Measurement values with trend indicator
  • Configuration via keyboard possible

Proven housing :

  • Robust, reliable aluminium housing
  • Protection class IP66
  • Wall or duct mount possible

Power supply :

  • 10…28 VDC
  • No intrinsically safe power supply required

Outputs :

  • The two analogue outputs can be freely selected and scaled
  • 2-wire (2 x 4...20 mA)

Exchangeable probes :

  • Different probes can be connected for different applications
  • Simple calibration of the probes outside the explosive zone
  • Explosion protection classes (gas and dust)

Transmitter:

  • II 2(1) G Ex eb mb [ia Ga] IIC T5 Gb
  • II 2(1) D Ex tb [ia Ga] IIIC T80°C Db

Probes:

  • II 1/2 G Ex ia IIC T5 Ga/Gb
  • II 1/2 D Ex ia IIIC T80oC Da/Db

Simple configuration :

  • The configuration can be specified directly when ordering
  • Later configuration on site is also possible, using the HW4 software

Technical Specification :

General

HF520-EX

Parameters

Humidity and temperature

Calculated Parameters

All psychrometric parameters

Housing material / Protection

Aluminium (DIN EN 1706 EN AC-AlSi 12 (Fe)) / IP66

Weight

Wall-mounted version: 1030 g
Duct mounted version: 1140 g

Start-up time

Standard cold <60 s / warm <30 s

Measurement interval

20…240 s

Display

Optional, LCD without backlight

Electrical connections

Connections: Ex-e terminals (0.2…2.5 mm2)
Cable gland: 16 x 1.5 (Ø cable 4.5…7 mm)

Power supply

10…28 VDC

Current Consumption

2x24 mA startup / 2x20 mA operation

Application temperature
Housing / electronics

-40…60 oC without display
-10…60 oC with display

Service interface

UART internal service interface
(only to be used outside the explosive zone)

CE / EMC compatibility

EMC Directive 2004/108/EC

ATEX directives

EU94/9/EC (ATEX)

EX identification

II 2(1) G Ex eb mb [ia Ga] IIC T5 Gb
II 2(1) D Ex tb [ia Ga] IIIC T80oC Db

Analogue output

Number

2

Current

4…20 mA, two-wire

Galvanic isolation

Yes

Maximum load

500 Ohms

Accuracy at 23oC

<20 uA

HC2-SM-EX / HC2-IM-EX / HC2-IE-EX / HC2-LDP-EX

General

Parameters

Humidity and temperature

Housing material / Protection

Stainless steel / IP66

Cable lengths

2/5/10 Metres

EX identification

II 1/2 G Ex ia IIC T5 Ga/Gb
II 1/2 D Ex ia IIIC T80oC Da/Db

Humidity measurement

Sensor

HC2-SM/IM/IE-EX: ROTRONIC HYGROMER® IN-1
HC2-LDP-EX: ROTRONIC HYGROMER
® LDP-1

Adjustment

Not via device menu
(only outside the explosive zone with HW4 + AC3001)

Measurement range

0…100 %RH

Accuracy at 23 oC

0.8 %RH

Temperature measurement

Sensor

HC2-SM/IM/IE-EX: Pt100 Class A
HC2-LDP-EX: Pt1000 1/3 Class B

Measurement range

-40…60 oC

Accuracy at 23 oC

0.1 K

Accessories

Filters

Steel sinter filter, SP-FN15

Cable gland

AC1301-MEX for conduit mounting and cable probes (IM)

Trade Information
  • Payment Terms
  • Cash in Advance (CID), Cash Advance (CA)
  • Supply Ability
  • 100 Piece Per Week
  • Delivery Time
  • 3 Days
  • Sample Available
  • Yes
  • Sample Policy
  • Sample costs shipping and taxes has to be paid by the buyer
  • Main Domestic Market
  • All India

JUPITER INTEGRATED SENSOR SYSTEMS PVT. LTD.
X