The OEM Transmitter
The OEM Transmitter Specification
- Voltage
- 10-28 Volt (v)
- Product Type
- Humidity Temperature Transmitter High Temperature
- Usage
- For Humidity and Temperature
The OEM Transmitter Trade Information
- Minimum Order Quantity
- 1 , , Piece
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID)
- Supply Ability
- 100 Pieces Per Week
- Delivery Time
- 3 Days
- Sample Available
- Yes
- Sample Policy
- Sample costs shipping and taxes has to be paid by the buyer
- Main Domestic Market
- All India
About The OEM Transmitter
In this industry, our name is renowned as one of the prominent exporters and importers of The OEM Transmitter which is used for hydraulics and pneumatics pumps and building services and compressors machine. A large array of electrical and process connections as well as all ideally used pressure ranges and output signals set the model O-10 apart. The offered transmitter is available in various specifications in accordance with the consumers demands. To ensure the satisfaction of our customers, we are able to deliver this the OEM transmitter in perfect order.
Service-Interface :
- UART (Mini-USB)
Board :
- Compact size
- Easy to install
Outputs :
- Two freely scalable analog outputs
- Available as 2-wire (XB20) or 3/4-wire (XB3x)
- UART service-interface
Pt100 RTD output :
- Direct 4-wire connection optional available
Wide selection of probes :
- PPS and steel probes with a temperature range up to
- 200oC available (With Hygromer HH-1R sensor up to 180 oC)
- 15mm and 25/15mm probe diameter available
- Probe lengths up to 700 mm
AirChip3000 :
- Compensates humidity and temperature over 30,000 reference points
- 2,000 data point memory
- Dew/frost point calculation
- Sensor auto-diagnostics and automatic correction
- Active alarming and information
- ASIC (Application Specic Integrated Circuit), micro-controller and EEPROM on one chip
Technical Specification :
| Specification | XB20 | XB3 | |
| Power supply / Connections | |||
| Circuit type | 2-wire loop powered | 3-wire | |
| Supply voltage VDC | 1028 VDC , V min = 10 V + (0.02 x Load) | 1540 VDC or 1228 VAC | |
| Output signal type | 4...20 mA | 0...1V, 0...5V, 0...10V, | |
| Nominal current consumption | 2 x 20 mA | < 50 mA | |
| Electrical connections | Terminal block | ||
| Polarity protection | Protective diode on V+ | ||
| Humidity measurement | |||
| Sensor | Hygromer IN-1 | ||
| Measurement range | 0100 %rh | ||
| Measurement accuracy at 23 oC | +1.0 %rh | ||
| Repeatability | 0.3 %rh | ||
| Long term stability | < 1 %rh / year | ||
| Temperature measurement | |||
| Sensor (Standard) | Pt100 RTD, IEC 751 1/3 class B | ||
| Measuring range | -100200oC (see also environmental limits) | ||
| Measurement accuracy at 23 oC | +0.2oC | ||
| Repeatability | 0.05 oC | ||
| Long term stability | < 0.1 oC / year | ||
| Calculated parameters | |||
| Psychrometric calculations | Dew or frost point (user congurable option) | ||
| Environmental limits | |||
| Storage and transit | -50+70 oC, 0100 %rh, non condensing | ||
| Operating limits at electronics | -40 +85 oC, 0100 %rh, non condensing | ||
| Maxi. humidity /temperature at sensor | See humidity/temperature window of sensor | ||
| Maximum air velocity at probe | 40 m/s (7,870 ft /min) - depends on dust lter type | ||
| Digital interface (service connector) | |||
| Interface type | UART (Universal Asynchronous Receiver Transmitter) | ||
| Maximum service cable length | 5 m (16.4 ft) | ||
| Firmware update | Via service connector, requires HW4 software | ||
| Start-up time and data refresh rate | |||
| Start-up time | 3.4s (typical) | 1.9s (typical) | |
| Data refresh rate | 3.4s (typical) | 1.7s (typical) | |
| Conformity with standards | |||
| CE / EMC immunity | EMC Directive 2004/108/EG: | ||
| Solder type | Lead free (RoHS directive) | ||
| FDA / GAMP directives | Compatible | ||
- Minimum Order Quantity
- 1 , , Piece
- Supply Ability
- 100 Pieces Per Week
- Delivery Time
- 3 Days
- Main Domestic Market
- All India
Get Latest Price
Price:
- 50
- 100
- 200
- 250
- 500
- 1000+
More Products in Industrial Humidity & Temperature Transmittters Category
HygroFlex 5 Series
Minimum Order Quantity : 1 Piece
Material : Metal
Product Type : Transmitter
Voltage : 1028 Volt (v)
Weight : 100500 Grams (g)
The Universal Industrial Transmitter
Minimum Order Quantity : 1 Piece
Material : ABS
Product Type : The Universal Transmitter
Voltage : 1540 Volt (v)
Weight : 540 Grams (g)
Contact Details
GST : 27AABCJ7018B1ZY
Send Inquiry
|
 |
JUPITER INTEGR SYSTEMRATED SENSOS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
