Humidity & Temperature Probe

About Humidity & Temperature Probe

General specifications

Device type Humidity / Temperature probe

Range of application measurement

-4085 C / 0100 %RH

Accuracy at 23 C, ï 5 K 0.8 %RH / 0.2 K @ 524 VDC

Adjusted at 23 C and 10, 35, 80 %RH @ 5 VDC

Outputs Analog (voltage / current), digital (UART / RS-485) : Analog output 01 / 5 / 10 V 01 / 5 / 10 V

0 / 4...20 mA, Digital output UART

Power supply 516 VAC / 524 VDC (0...1 V)

1216 VAC / 1624 VDC (all kind of output signals)

IP protection IP65

Technical information

Current consumption 7 mA (typical) @ 24 VDC, 010 V

12 mA (typical) @ 5 VDC, 01 V

Range of application electronics -4085 C / 0100 %RH

Functions

Psychrometric calculations Dew point / Frost point

Adjustment via software Single point, multipoint, dew point (%RH / C), with service cable

Probe

Filter Polyethylene, 20 m No filter ex works

Filter carrier Polycarbonate Brass, nickel-plated

Maximum wind velocity 20 m/s,

with polyethylene filter 3 m/s, without filter

Length of extension cable 2 m / 5 m

Maintenance / Calibration Annual calibration (recommended)

Humidity sensor ROTRONIC HYGROMER IN-1

Temperature sensor Pt100 1/3 Class B

Conformities / Housing

CE / EMC compatibility CE conformant 2007/108/EG

FDA / GAMP conformity 21 CFR Part 11 / GAMP 5

Housing material Polycarbonate PEEK